EGYPT · SCREW SOURCING REVIEW · VERIFIED 27 OCTOBER 2026
An Egyptian screw quotation should answer three questions before price: who makes the screw, which exact part is being quoted, and what evidence will accompany the accepted order. A local factory, an importer and a hardware distributor can all be relevant, but they solve different purchasing problems.
This guide compares 8 businesses with first-party screw offerings and identifiable Egyptian operating or contact routes. Egypt Bolt and Macca provide direct manufacturing starting points; ETACO combines manufacturing and distributed construction products. The other entries supply imported or traded screws for industrial and building-material schedules.
The numbered sequence is an editorial sourcing shortlist, not a ranking by market share, factory size or tested product quality. Official information was reviewed on 27 October 2026. Availability, producing origin and application approval still require part-specific confirmation.
Shi Shi Tong publishes this guide and manufactures custom screws in Shenzhen, China. Its separate capability section below is not a claim of Egyptian manufacture, local inventory or an established local distributor.
Start with a Quote That Separates Product from Supply Route
Define the screw before comparing sellers. An M4 pan-head machine screw for an appliance, a flat-head drilling screw and a drywall screw cannot be selected from the same vague description. A head photograph or nominal length also leaves important details unresolved.
For a factory enquiry, ask which operations are performed at the named plant. For an imported item, ask who actually manufactures it. For a combined board/profile package, retain the screw’s own identity and acceptance requirements rather than treating it as an incidental accessory.
- Issue a drawing revision or exact catalog reference with thread, head/drive, point, diameter and all relevant lengths.
- Agree material/condition, finish or locking treatment, dimensional tolerances and intended receiving material.
- Identify the legal seller, manufacturer and production/finishing source; distinguish branch, mailing address and factory.
- Request representative samples and the reports or product documents applicable to that exact screw and application.
- Confirm selling unit, pack count, quantity, dispatch location and repeat-order change controls separately from technical approval.
1. Egypt Bolt
Cold-formed screw and bolt manufacturer with additional supplied fasteners · Published factory: Plot 1/12, 13th Industrial Area, Basteen Al Ismailia, Bilbis, Sharkiya
Egypt Bolt describes in-house wire drawing, cold heading, thread rolling, heat treatment, finishing and dimensional/mechanical inspection. Its screw catalog separates countersunk and pan-head machine screws from tapping, chipboard and drywall types, with an electrical-assembly emphasis.
The current factory contact is in Bilbis, Sharkiya. The homepage distinguishes its screw/bolt manufacturing from additional fasteners offered on supply. Product-filter sizes across a wider catalog should not be combined into an assumed cold-heading envelope.
This is a direct-production enquiry route for a defined OEM screw. Request the accepted drawing and actual material, processing and finishing records. ISO and inspection-document claims on the website require current documentary verification; customer-name displays and headline output or response promises are not independent factory-audit evidence.
Before approval: Obtain drawing acceptance and the exact production, heat-treatment and plating route; verify current certificates for the order.
Official resources: Official product / capability page · Company / location source
2. Macca For Fasteners Manufacturing
Screw manufacturer · Published factory: El Raswa Industrial Zone, Port Said, Egypt
Macca’s official page identifies screw production for cookware, electrical and household appliances and other industrial applications. Its displayed product set includes M3, M4, M5 and M6 machine screws with flat and pan heads, plus a self-tapping screw category.
The company gives El Raswa Industrial Zone in Port Said as its factory location. This provides a more specific manufacturing route than a country-targeted seller page, while leaving the precise production capability for a particular drawing to be agreed.
Use Macca when the starting point is a small assembly screw rather than a mixed construction-material package. The visible nominal diameter and head description do not resolve pitch, recess, length, material, coating or mechanical acceptance. Obtain a controlled specification and representative samples before fixing a repeat-order reference.
Before approval: Confirm head/drive, full thread designation, usable length, material and finish rather than ordering by the sample image alone.
Official resources: Official product / capability page · Company / location source
3. ETACO
Construction-fastener manufacturer and branded-product distributor · Published contact: Z1, Plot 4, Northern Expansion Industrial Group, 6th of October City, Cairo
ETACO’s official shop names drywall screws, self-drilling screws and customized fasteners alongside anchors, rods and other construction products. Its company pages describe Egyptian in-house manufacturing and a factory expansion, while separately presenting distributed tool and anchor brands.
The published contact is in the Northern Expansion industrial area of 6th of October City. That supports a local project enquiry, but the manufacturing narrative does not identify the producing process and origin of every item in its mixed offer.
Consider ETACO for a construction bill of quantities that needs screws and associated fastening products. Separate the factory-made item from a traded brand on each quote. Ask for the exact screw, finish, source and application data; generic innovation, project-client and quality statements do not establish part-specific approval.
Before approval: Ask which quoted screw is made in-house, which is distributed, and which plant/source and documents apply.
Official resources: Official product / capability page · Company / location source
4. EFTA Egypt
Independent stocking distributor and engineering/procurement supplier · Published local contact: 5 Ali El-Gendy Street, first floor, off Ahmed Fakhry Street, Nasr City, Cairo
EFTA’s fastener page provides specific screw families, including socket heads, flat and rounded heads with different drives, self-tapping and sheet-metal screws, and set screws. Its own company description identifies an independent stocking-distribution and engineering business.
The local office is in Nasr City, Cairo. Its fastener literature describes international procurement for standard and special components. German group connections and partner logos are a sourcing route, not proof that screws are manufactured at the Cairo address.
This route is relevant when screws are purchased with mechanical, electrical or other C-parts. Keep the accepted manufacturer and article or drawing visible through the quotation, and agree the material, finish, documents, order quantity and replenishment terms.
Before approval: Identify the actual manufacturer and accepted part; do not treat supplier logos or overseas group access as local production.
Official resources: Official product / capability page · Company / location source
5. El Kharbotly Co. & Partners
Importer and distributor of aluminium-window/door hardware and fasteners · Published mailing contact: P.O. Box 7, Haddaik El Kobba, Cairo 11331
El Kharbotly’s fastener page explicitly separates self-tapping screws and machine screws from blind rivets and wall plugs. Its broader business focuses on imported aluminium-window and door hardware, making it a relevant route for a hardware-associated screw enquiry.
The company describes an importing business, and its site gives a Cairo postal contact. A P.O. box should not be presented as a manufacturing plant, warehouse or customer-visit address. Local distribution and overseas supplier contacts are separately offered.
Ask for the exact screw reference and its compatibility with the frame, fitting and receiving material. A general aluminium-hardware history does not define a screw’s stainless grade, coating performance or structural use. Confirm the maker, pack quantity and actual collection or dispatch arrangement before placing an order.
Before approval: Match screw geometry, material and finish to the hardware application and confirm the actual supply/dispatch location.
Official resources: Official product / capability page · Company / location source
6. Al Badr For Construction
Construction-material importer, supplier and contractor with broader manufacturing activity · Published supply locations include Cairo, Hurghada, Kafr El Sheikh and El Alamein
Al Badr’s own import page names drywall screws and self-drilling screws, with different published lengths, alongside threaded rods and other fixing products. Its wider contracting and manufacturing operations should not obscure that these screw lines are described as imports.
The same page provides supply contacts in Cairo, Hurghada, Kafr El Sheikh and El Alamein. This is a practical enquiry route for a finishing-material schedule or multi-product project order, not proof of a local screw factory.
Tie the selected screw to the board, metal profile or other receiving material rather than approving only a length description. Confirm the actual maker, point/thread, finish, package and installation requirements. A list of project locations or a wider company manufacturing capability is not a part-level corrosion or load declaration.
Before approval: Specify the screw separately from the board/profile package and verify length, thread, coating, maker and selling unit.
Official resources: Official product / capability page · Company / location source
7. Sunshine Import & Export
Importer and trade/project supplier · Published contact: Abu Hilal Street, off Batti–Qalyub Road, Qalyub area, Egypt
Sunshine’s current catalog explicitly labels imported self-drilling and galvanized drywall screw products and uses individual SKU and pack references. It offers trade/project quotations and distributor supply rather than claiming an Egyptian screw-production line.
Sunshine publishes an Abu Hilal Street contact off the Batti–Qalyub Road. For its drilling or drywall screws, confirm the exact SKU, coating, dimensions and pack quantity for the intended application.
A structured SKU helps communication but is not a complete engineering specification. Some displayed product names, codes and size fields merit reconciliation before purchase. Confirm the exact dimensions, finish, pack count and actual manufacturer in writing. Dealer availability and order-tracking functions are not guarantees of current inventory or suitability.
Before approval: Reconcile the selected SKU, title, dimensions, coating and pack count with a written quotation and actual manufacturer.
Official resources: Official product / capability page · Company / location source
8. Mekka Nails Trading and Supplies
Industrial and construction fastener supplier/distributor · Published contact: 56 Metwally Awis Street, El Sabtia, Cairo
Mekka’s English company page identifies machine, wood and self-drilling screws, including long and short variants, in a broader industrial/construction fastener-distribution range. It is therefore more specific than a nail-only business listing.
Mekka publishes a Metwally Awis Street contact in El Sabtia, Cairo. It provides a local trading route for machine, wood and drilling screws; ask for the manufacturer, exact product reference and order quantity.
Use the family names to begin a schedule, then agree the actual thread, head/drive, length, material and finish. A general long-screw offer is not proof of a particular thin, extra-long or high-strength specification. Ask for the maker, samples and necessary acceptance records, and confirm the quotation and dispatch terms for the selected item.
Before approval: Turn the broad family description into a full part specification and identify the actual producing source.
Official resources: Official product / capability page · Company / location source
Egyptian Screw Sourcing Routes Compared
| Company | Relevant sourcing route | Business role and location | Before ordering |
|---|---|---|---|
| 1. Egypt Bolt | Machine and tapping screws for electrical/OEM assemblies | Sharkiya factory; supplied accessories and catalog limits must be distinguished from in-house production | Obtain drawing acceptance and the exact production, heat-treatment and plating route; verify current certificates for the order. |
| 2. Macca For Fasteners Manufacturing | Small machine screws and self-tapping screws for appliance/component schedules | Port Said factory; published sample sizes are not a complete approved specification | Confirm head/drive, full thread designation, usable length, material and finish rather than ordering by the sample image alone. |
| 3. ETACO | Drywall, self-drilling and customized construction fastener schedules | Egyptian manufacturing business and distributed brands are separate sourcing routes | Ask which quoted screw is made in-house, which is distributed, and which plant/source and documents apply. |
| 4. EFTA Egypt | Socket, machine, tapping, sheet-metal and set screw sourcing with wider C-parts | Cairo supply office and international procurement network; not a local screw plant | Identify the actual manufacturer and accepted part; do not treat supplier logos or overseas group access as local production. |
| 5. El Kharbotly Co. & Partners | Machine and self-tapping screws alongside aluminium hardware | Cairo mailing contact; not evidence of a factory or dispatch warehouse | Match screw geometry, material and finish to the hardware application and confirm the actual supply/dispatch location. |
| 6. Al Badr For Construction | Imported drywall and self-drilling screws within finishing-system orders | Egyptian store network; imported screw offer is distinct from wider manufacturing | Specify the screw separately from the board/profile package and verify length, thread, coating, maker and selling unit. |
| 7. Sunshine Import & Export | SKU-based imported drywall and self-drilling screw packs | Qalyub contact and distributor supply route; no own screw manufacturing established | Reconcile the selected SKU, title, dimensions, coating and pack count with a written quotation and actual manufacturer. |
| 8. Mekka Nails Trading and Supplies | Machine, wood and self-drilling screw trade enquiries | Cairo trading contact; long/short screw offer is not proof of own custom production | Turn the broad family description into a full part specification and identify the actual producing source. |
Use the Comparison to Shortlist, Not to Approve a Joint
The table preserves the distinction between production and supply. A mixed-range manufacturer may still import selected products. A distributor can be appropriate for a standard item, but its address is not the screw’s country of origin.
For machine assemblies, retain the drawing, accepted source and inspection requirements. For drywall or metal fixing, also retain the receiving-material and installation limits. A broad quality claim or a standard number on a category page does not demonstrate performance in a particular joint.
When a Drawing Calls for a Custom Screw Instead
A noncatalog head, shoulder, special drive or unusually long and slender shank may require an engineering review rather than another standard-stock enquiry. Submit the whole geometry and operating requirement; do not combine separate maximum diameter, length and strength claims into an assumed manufacturable part.
Shi Shi Tong offers custom screws made to drawings and long-screw enquiries from Shenzhen. Review our quality-control approach and send the complete specification. Manufacturing feasibility, samples, required records and shipping arrangements are assessed for the actual project; this is a disclosed publisher alternative, not an Egyptian branch listing.
Questions Before Ordering Screws in Egypt
Are all 8 businesses Egyptian screw factories?
No. The profiles distinguish screw production, mixed manufacturing/distribution and commercial supply. A local shop, office or postal contact does not prove manufacture of every catalog item.
Which entries are a useful starting point for small machine screws?
Egypt Bolt identifies machine screws and electrical assembly applications. Macca displays small flat- and pan-head machine screws. EFTA and other suppliers offer additional sourcing routes, but the actual maker and full specification still need confirmation.
Does a local manufacturer necessarily make its drywall or drilling screws?
Not necessarily. Mixed fastener and construction businesses can manufacture some products and distribute others. Ask for the producing and finishing source of each quoted screw rather than inferring it from a general factory description.
Is a standard number enough to place an order?
No. Confirm the applicable standard/revision and full dimensions, material, finish and acceptance conditions. Catalog standard mappings and size filters should be checked against the exact item and drawing, not pooled across a product range.
What should I verify on a packaged imported screw?
Reconcile the SKU, product title, dimensions, point/thread, coating and pack count with the written quotation. Identify the actual manufacturer and request the relevant product/lot documents when the application needs controlled sourcing.
Choose the Right Route, Then Lock the Accepted Part
For an OEM drawing, begin with a producer that accepts the entire specification. For standard maintenance or construction items, compare qualified suppliers on the same controlled requirement. Keep the actual manufacturer and source visible even when purchasing through a local distributor.
The useful result is an accepted part file: drawing or article, material/finish, source, samples, required records and order terms. That is a firmer basis for repeat supply than treating every Egyptian fastener address as an equivalent screw factory.
